Skip to main content

Melissa

Current Tasklist by project.​

Chama​

  • Write up clearly we parsed the INP file for OSTRICH to turn it into a TPL file.

  • Modify the rain gages section on Banklick

    • ST_E assigned to St. Elizabeth Hospital Location.
    • Remove calls to rainfall raingage_01.
    • Remove single raingage runs until further notice.

  • Add in Deven's Plumes to the Banklick inp files.

    • Create multible Single Plume files

  • Create Sensor csv with different numbers of possible locations for Example6_Final.

    • 4 possible locations choose 2

  • Modify the Database Models for Chama so that they match the lucid chart ERD that we went over on 12/15/2022.

  • UPDATE QUEREYS in using Djnago modules format do 1 the queries for each type Inserts and Select. Send the rest to Deven.

    • Comment out my Current Inserts/Selects
    • Access the Models using Django and insert and select using Django. (ORSANCO does this if I need an example)

  • Access infomration for models using Constants instead of Config file. I will have to modify the Optimization appoach constants.

  • Start coming up with UI design for fron end similar to OSTRICH and run it by Deven then Send it to Jake and Sudhir.

  • Fix rainfall for E6 Final using .23_inch timeseries Subcatchments below S1.3 and S2.3 should be full .23_inch rain. Below S1.1 and S2.1 should be 80 percent of .23 and subcatchment S1.1 and S2.1 should be 75 percent of .23.

  • Look into Chama documentation to find the differences between the Coverage optimization approaches scenario and time-scenario.

  • Look into and test how to create a damage matrix in Chama.

  • Look into documentation in Chama on how to create a chama run with multiple Chama Scenarios in it.

  • Create a new Sensor CSV for Banklick 6 Storage Unit Sensors. The sensors we talked about durring the 12/16/2022 Meeting.

  • Modify Code so that it looks at Storage units for Banklick and land...

  • Refactor code so that PySWMM code looks for junction polluant and subcatchment washoff. Print all of the following so that Sudhir and Ann can choose which values they want for the Subcatchment Washoff.

    • Subcatchment washoff / area
    • subcatchment washoff * area
    • subcatchment washoff

  • Explore how adding weights for specific sensors in Chama works.

  • Create a gradient Plume on example6_Final

  • Start documenting what Chama calls things as well as what we call things in preparation for the report.

  • Start writing next powerpoint. (This is a list of topics that should be in the next powerpoint.)

    • Define How the budget of Chama works, Weights, Scenarios vs Time-Senarios...
    • Have runs made that can be showen in the meeting.
    • The structure of the database should be gone over.
    • Deven's explination on Plume Generation.
    • Sudhir explination on Rain Gages.

Older/Low Priority Tasks​

  • Banklick Chama is not working with Multiple rain gages.
    • The Signals file is the only difference so i am looking at the signals file and how it is generated.
    • Comment the code as I go There are some comments but for ease of changing things next time I wil be adding additional comments.
  • Look into Flow Paths and DEM using QGIS for Banklick

ORSANCO​

Currently ORSANCO tasks are on hold see my ORSANCO. I am waiting on Sudhir to look into timescale db. Deven is working on the frontend/backend issues.

  • Get the current code for ORSANCO on Deven's machine
  • Create ORSANCO Testing documents
    • Read me based on Word Testing Documents
  • Start the ORSANCO Testing
    • Full test for Script files with Empty Database

Hydrotrek​

  • MTW and Benz files are on dropbox in the HydroTrek Input files 2021 Database Gold Standards folder.
  • Benz runs on Jake's Machine with MSX.
  • Grafana work on HydroTrek needs to be reworked with new database changes.
  • Create a power BI project for MTW based on the pervious Benz Power BI.
  • Update the HTEX Rework Notes document on Lucid Chart.
  • Updated the table columns everything else looked fine. Not much to change.
  • Update HTTL documentation on Lucid Chart.
  • Talk with Steve about HTTL how to deal with volume curve in different shaped tanks.
  • Creating a document on how to create a network for HydroTrek Suite.
    • Explain how to use C# to set up an empty SCHEMA
    • How to use the migration and what projects they are associated with.
    • How to add network data
    • How to get the SCADA data.
    • Make sure to document what SCADA data is required.
  • Review HTSX
  • This is running on Jake's machine but not mine. I have 20 errors
  • OPXII is not running on my machine. I currently have 32 errors for project right now EOD.
    • We no longer use OPXI instead we fill the tables OPXI filled with Console Core.
  • EPANET
    • Valve has been added.
    • There were additions that had to be added to the NetworkManager.csproj
  • writing up the dependencies for each project.
    • Where to change connection strings.
    • What project gets run 1st ...

G&A​

High Priority​

Medium Priority​

Low Priority​

My scale for Priority​

Highest: (Anything Sudhir tells you to do urgently/ Deadlines) \ High: (Need this done today) \ Medium - High: (Would be nice if it is done today) \ Medium: (Another task in a list of task) \ Medium - Low: (I know I must do it but it and I will get to it when I have time)\ Low: (It will get done by the end of the project.) \ Lowest: (By the time I get to it. It will likely have changed or been decided it is irrelevant.)

Last updated on by Viraj